What does each delivery stop cost? A cost per stop calculator
Updated
Short answer
Cost per delivery stop = (driver labor + vehicle costs + overhead) ÷ completed stops, all for the same day, week or month. Example with invented numbers: 10 vans, each driver paid 9 hours at $25 plus 12% employer costs ($252.00), 120 miles at $0.70 plus $45 fixed per van ($129.00), and $250 a day of fleet overhead come to $4,060 a day; with 60 completed stops per van (600 in all), that is $4,060 ÷ 600 = $6.77 per stop. Enter your own numbers in the calculator below: the result is only as good as what you put in.
Not a market rate or a price to quote: it gives your own cost from your own inputs, for an average day, and a failed delivery that needs a second visit is not in it unless you add that visit’s cost.
How it works in Afi Planner
The formula and its assumptions
The calculator works out one day for the whole fleet. Use numbers from the same day, or from an average day, on every line.
- Driver labor = vans × paid hours × hourly wage × (1 + employer costs %). Paid hours run from leaving the depot to returning and unloading; employer costs are payroll taxes, workers’ compensation and benefits
- Vehicles = vans × (miles × cost per mile + fixed cost per van per day). Fuel, maintenance and tires scale with miles; insurance, lease or depreciation and registration are a cost per day
- Overhead = one daily figure for the whole fleet: routing software, drivers’ phones, a share of depot space and of dispatch time. It is spread over more stops as the fleet grows
- Cost per stop = (labor + vehicles + overhead) ÷ (vans × completed stops per van). Count only delivered stops
- It assumes one driver per van, paid by the hour. For drivers paid by the day, set paid hours to 1 and the wage to the day rate
Worked examples by fleet size (invented numbers)
These numbers are invented to show the arithmetic. They are not benchmarks, averages or results from any customer. The larger fleets here also have denser routes (more stops per van, fewer miles), and that is what moves cost per stop most: a bigger fleet on sparse routes would not get the same number. The 10-van column is what the calculator opens with.
- 3 vans: ($645.12 labor + $366.00 vehicles + $90.00 overhead) ÷ 135 stops = $8.16 per stop
- 10 vans: ($2,520.00 labor + $1,290.00 vehicles + $250.00 overhead) ÷ 600 stops = $6.77 per stop
- 25 vans: ($6,552.00 labor + $2,700.00 vehicles + $500.00 overhead) ÷ 2,000 stops = $4.88 per stop
| One day (invented numbers) | 3 vans | 10 vans | 25 vans |
|---|---|---|---|
| Paid hours × hourly wage | 3 vans: 8 h × $24 | 10 vans: 9 h × $25 | 25 vans: 9 h × $26 |
| Driver labor, with 12% employer costs | 3 vans: 3 × $215.04 = $645.12 | 10 vans: 10 × $252.00 = $2,520.00 | 25 vans: 25 × $262.08 = $6,552.00 |
| Vehicles: miles × $0.70 + $45 fixed | 3 vans: 3 × (110 mi) = $366.00 | 10 vans: 10 × (120 mi) = $1,290.00 | 25 vans: 25 × (90 mi) = $2,700.00 |
| Fleet overhead per day | 3 vans: $90.00 | 10 vans: $250.00 | 25 vans: $500.00 |
| Total per day | 3 vans: $1,101.12 | 10 vans: $4,060.00 | 25 vans: $9,752.00 |
| Completed stops | 3 vans: 3 × 45 = 135 | 10 vans: 10 × 60 = 600 | 25 vans: 25 × 80 = 2,000 |
| Cost per stop | 3 vans: $8.16 | 10 vans: $6.77 | 25 vans: $4.88 |
What the calculator leaves out
It is a one-day estimate from averages, so some costs your books will show are not in it.
- Failed deliveries: a stop delivered on the second try costs two visits. Add the extra visits to the cost, not to completed stops
- Overtime and uneven days: use an average day, or work out a busy day and a quiet day separately
- One-off costs such as a new van or a large repair: spread them over the days they cover
Where Afi Planner fits
Afi Planner is route planning and delivery management software for local delivery teams, made by Afi Labs. Its analytics include a Cost per stop card that prices each route at your own cost per hour and per mile, using the hours and miles drivers really drove where the driver app measured them, and divides by delivered stops; fixed costs and overhead are in it only if you build them into those two rates.
Try it in the live demo
A fictional delivery company in the middle of its day. Read-only, no sign-up.
Open the live demo →Feature
Analytics
Delivered and failed orders, on-time rate, ETA accuracy, stops per hour and miles by day and by driver, with travel times learned from GPS and Excel export.
5 steps · 4 min read
Analytics, reports and Excel exports
Frequently asked questions
Is the result a benchmark for cost per stop?
No. The calculator opens with invented example values. The result is your own cost only once every input is your own.
Why does a bigger fleet show a lower cost per stop in the examples?
Because the examples give the bigger fleets denser routes and spread the fleet overhead over more stops. Stops per van and miles move the result far more than fleet size alone.
Should I use planned or actual hours and miles?
Actual ones, from timesheets, fuel cards or GPS, when you have them. Planned hours and miles understate the cost when the day runs long.
Does the calculator send my numbers anywhere?
No. It runs in your browser, and nothing you type is sent or stored.
More answers
Measure cost per stop on your real routes
Price your routes at your own hourly and per-mile rates on a 3-month free trial, no credit card.
Questions about your setup? Talk to sales